TPD4105K

TPD4105K TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC TPD4105K The TPD4105K is a DC brushless motor driver using high-voltage PWM control. It is fabricated using a high-voltage SOI process. The device contains a level shift high side driver, low side driver, IGBT outputs, FRDs and protective functions for over-current and under-voltage protection circuits, and a thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4105K. www.DataSheet4U.com Features Bootstrap circuits give simple high-side supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 μs and it is the best for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in. Included over-current and under-voltage protection, and thermal shutdown. The regulator of 7V (typ.) is built in. Package: 23-pin HZIP. This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that the environment is protected against electrostatic discharge. Weight HZIP23-P-1.27F : 6.1 g (typ.) HZIP23-P-1.27G : 6.1 g (typ.) HZIP23-P-1.27H : 6.1 g (typ.) 1 2007-05-10 TPD4105K Pin Assignment www.DataSheet4U.com 1 HU 2 3 HV HW 4 LU 5 LV 6 LW 7 IS1 8 9 10 11 12 13 14 15 16 17 NC BSU U VBB1 BSV V BSW W VBB2 NC 18 19 20 21 22 23 IS2 RS DIAG VCC GND VREG Marking Lot No. TPD4105K JAPAN Part No. (or abbreviation code) ...