Dual-Channel Power Distribution Switch
TS2026L
Dual-Channel Power Distribution Switch
Pin assignment:
1. ENA 2. FLGA 3. FLGB 4. ENB 5. OUTB 6. GND 7. IN 8. OU...
Description
TS2026L
Dual-Channel Power Distribution Switch
Pin assignment:
1. ENA 2. FLGA 3. FLGB 4. ENB 5. OUTB 6. GND 7. IN 8. OUTA
140mΩ max. on-resistance per channel 2.7V to 5.5V operating range Under voltage lockout
www.DataSheet4U.com General
Description
The TS2026L is high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The TS2026L are internally current limited and have thermal shutdown that protects the device and load. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing that load or toggling the enable input will reset the device output. Both device employ soft-start circuitry that minimized inrush current in application where highly capacitive loads are employed. A fault status output flag is asserted during over current and thermal shutdown conditions. Transient faults are internally filtered.
Features
140mΩ max. on-resistance per channel 2.7V to 5.5V operating range 500mA min. continuous current per channel Short-circuit protection with thermal shutdown Thermal isolated channels. Fault status flag with 3ms filter eliminates false assertions. Under voltage lockout Reverse current flow blocking (no “body diode”) Logic-compatible inputs Soft-start circuit Low quiescent current
Applications
USB peripherals General purpose power switching ACPI power distribution Notebook PCs PDAsPC Card hot swap
Ordering Information
Part No.
TS2026L...
Similar Datasheet