PS3100

PS3100 Multi-chemistry Smart Battery Manager Module Features Standard sized modules for assembly into custom and standard sized battery packs Designed to work with 2-4 cell series Li Ion or 6-10 cell series Ni pack configurations - Contains patented core calculation and battery control algorithms for Li Ion and NiMH chemistries PCB Assembly www.DataSheet4U.com Can be programmed with application specific cell parameters for NiMH and Li Ion chemistries Fully compliant with industry standard Smart Battery Data Specification V1.1a SMBus V1.1 with PEC / CRC-8 communication with system host High accuracy measurement of charge / discharge current, voltage, and temperature with on-chip 14-bit integrating A/D Precise capacity reporting using PowerSmart patented algorithms and 3D battery cell models 3D models and “learned” parameters stored in on board EEPROM; fully field reprogrammable via SMBus interface Extremely low power operation: Sleep Mode: < 10 uA typical Run Mode: < 500 uA typical Sample Mode < 250 uA typical Complete hardware and software development tools available ESD protection – passes 8kV contact and 15kV air without capacity reset Ordering Information Pre-tested, fully assembled modules are available: PS3110 – NiMH module PS3120 – Li Ion module Please specify number of series cells when ordering. Quick Start Follow these directions to assemble a pack with the PS3100 module. Use standard precautions when handling static sensitive devices. M...