Voltage Stabilizers
LL1.5 THRU LL2.4
Voltage Stabilizers
MiniMELF
FEATURES ♦ Silicon Planar Stabilizer Diodes ♦ Monolithic integrated analo...
Description
LL1.5 THRU LL2.4
Voltage Stabilizers
MiniMELF
FEATURES ♦ Silicon Planar Stabilizer Diodes ♦ Monolithic integrated analog circuits in Min∅ .063 (1.6) .055 (1.4)
Cathode Mark
.142 (3.6) .134 (3.4)
.019 (0.48) .011 (0.28)
iMELF case, designed for small power stabilizer and limitation circuits, providing low dynamic resistance and high-quality stabilization performance as well as low noise. In the reverse direction, these devices show the behavior of forward-biased silicon diodes.
♦ The end of the device marked with the cathode ring
is to be connected: LL1.5 and LL2 to the negative pole of the supply voltage LL 2.4 to the positive pole of the supply voltage
Dimensions in inches and (millimeters)
♦ These diodes are also available in DO-35 case
with the type designation ZTE1.5 … ZTE2.4.
MECHANICAL DATA
Case: MiniMELF Glass Case (SOD-80) Weight: approx. 0.05 g
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified
Symbol Operating Current see Table “Characteristics” Inverse Current Power Dissipation at Tamb = 25 °C Junction Temperature Storage Temperature Range
1) Valid
Value
Unit
IF Ptot Tj TS
100 3001) 150 –55 to +150
mA mW °C °C
provided that electrodes are kept at ambient temperature.
4/98
LL1.5 THRU LL2.4
ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified
Symbol Forward Voltage at IF = 10 mA Temperature Coefficient of the stabilized voltage at IZ = 5 mA LL1.5, LL2 ...
Similar Datasheet