CY7C63310

CY7C63310 CY7C638xx enCoRe™ II Low-Speed USB Peripheral Controller 1.0 Features — 4 I/O pins with 3.3V logic levels — Each 3.3V pin supports high-impedance input, internal pull up, open drain output or traditional CMOS output SPI serial communication — Master or slave operation — Configurable up to 4 Mbit/second transfers in the master mode — Supports half duplex single data line mode for optical sensors 2-channel 8-bit or 1-channel 16-bit capture timer registers. Capture timer registers store both rising and falling edge times — Two registers each for two input pins — Separate registers for rising and falling edge capture — Simplifies interface to RF inputs for wireless applications Internal low-power wake-up timer during suspend mode — Periodic wake-up with no external components 12-bit Programmable Interval Timer with interrupts Advanced development tools based on Cypress MicroSystems PSoC™ tools Watchdog timer (WDT) Low-voltage detection with user-configurable threshold voltages Operating voltage from 4.0V to 5.5VDC Operating temperature from 0–70°C Available in 16/18-pin PDIP, 16/18/24-pin SOIC, 24-pin QSOP and 32-lead QFN packages Industry standard programmer support enCoReTM II USB—“enhanced Component Reduction” — Crystalless oscillator with support for an external clock. The internal oscillator eliminates the need for an external crystal or resonator — Two internal 3.3V regulators and internal USB pull-up resistor www.DataSheet4U.com — Confi...