L6228Q
DMOS driver for bipolar stepper motor
Features
■ Operating supply voltage from 8 to 52 V ■ 2.8 A output peak cu...
L6228Q
DMOS driver for bipolar stepper motor
Features
■ Operating supply voltage from 8 to 52 V ■ 2.8 A output peak current (1.4 Ar.m.s.) ■ RDS(on) 0.73 Ω typ. value @ TJ = 25 °C ■ Operating frequency up to 100 kHz ■ Non dissipative overcurrent protection ■ Dual independent constant tOFF PWM current
controllers ■ Fast/slow decay mode selection ■ Fast decay quasi-synchronous rectification ■ Decoding logic for stepper motor full and half-
step drive ■ Cross conduction protection ■ Thermal shutdown ■ Undervoltage lockout ■ Integrated fast free wheeling diodes
Applications
■ Bipolar stepper motor Figure 1. Block diagram
Datasheet − production data
VFQFPN32 5 mm x 5 mm
Description
The L6228Q is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in BCD multipower technology, which combines isolated DMOS power
transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two-phase bipolar stepper motor including: a dual DMOS full-bridge, the constant off-time PWM current controller that performs the chopping regulation and the phase sequence generator, that generates the stepping sequence. Available in VFQFPN32 5 mm x 5 mm package, the L6228Q features a non-dissipative overcurrent protection on the high-side power MOSFETs and thermal shutdown.
VBOOT VCP
EN CONTROL HALF/FULL
CLOCK RESET CW/CCW
VBOOT CHARGE PUMP
THERMAL PROTECTION
OCDA OCDB
STEPPING SEQUENCE GENERATION
VOLTAG...