FPGA Configuration Flash Memory
Features
www.DataSheet4U.com • Programmable 16, 777, 216 x 1-bit Serial Memories Designed to Store Configuration
Progra...
Description
Features
www.DataSheet4U.com Programmable 16, 777, 216 x 1-bit Serial Memories Designed to Store Configuration
Programs for Field Programmable Gate Arrays (FPGAs)
3.3V Output Capability 5V Tolerant I/O Pins Program Support using the Atmel ATDH2200E System or Industry Third-party
Programmers In-System Programmable (ISP) via 2-wire Bus Simple Interface to SRAM FPGAs Compatible with Atmel AT40K and AT94K Devices, Altera® FLEX®, Excalibur™, Stratix®, Cyclone™ and APEX™ Devices Cascadable Read-back to Support Additional Configurations or Higher-density Arrays Low-power CMOS FLASH Process Available in 8-lead LAP and 20-lead PLCC Packages Emulation of Atmel’s AT24CXXX Serial EEPROMs Low-power Standby Mode Single Device Capable of Holding 4 Bit Stream Files Allowing Simple System Reconfiguration Fast Serial Download Speeds up to 33 MHz Endurance: 10,000 Write Cycles Typical Green (Pb/Halide-free/RoHS Compliant) Packages
FPGA Configuration Flash Memory AT17F16A
1. Description
The AT17FxxA Series of In-System Programmable Configuration PROMs (Configurators) provide an easy-to-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17FxxA Series device is packaged in the 8-lead LAP and 20-lead PLCC, see Table 1-1. The AT17FxxA Series Configurator uses a simple serial-access procedure to configure one or more FPGA devices. The AT17FxxA Series Configurators can be programmed with industry-standard programmers, Atmel’s ATDH2200...
Similar Datasheet