NCV8675
Linear Regulator - Low Dropout, Very Low Iq, Reset, Reset Delay
350 mA
The NCV8675 is a precision 5.0 V and 3.3 ...
NCV8675
Linear
Regulator - Low Dropout, Very Low Iq, Reset, Reset Delay
350 mA
The NCV8675 is a precision 5.0 V and 3.3 V fixed output, low dropout integrated voltage
regulator with an output current capability of 350 mA. Careful management of light load current consumption, combined with a low leakage process, achieve a typical quiescent ground current of 34 mA.
NCV8675 is pin for pin compatible with NCV4275 and it could replace this part when very low quiescent current is required.
The output voltage is accurate within ±2.0% for D2PAK−5 package and ±2.5% for DPAK−5 package, and maximum dropout voltage is 600 mV at full rated load current.
It is internally protected against input transients, input supply reversal, output overcurrent faults, and excess die temperature. No external components are required to enable these features. Features
5 V and 3.3 V Fixed Output (2.5 V Version Available Upon Request) ±2.0% or ±2.5% Output Accuracy, Over Full Temperature Range 34 mA Typical Quiescent Current at Iout = 100 mA, 50 mA Maximum
up to 85°C
600 mV Maximum Dropout Voltage at 350 mA Load Current Wide Input Voltage Operating Range of 4.5 V to 45 V Internal Fault Protection
♦ −42 V Reverse Voltage ♦ Short Circuit/Overcurrent ♦ Thermal Overload
AEC−Q100 Qualified EMC Compliant NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
These are Pb−Free Devices
Vin
Bandgap Reference
Thermal Shutdown
Error Amplifier
+ −
D
Vout Current Limi...