ESD Protection
PRODUCTS - RailClamp PROTECTION www.DataSheet4U.com Description
RailClamps are ultra low capacitance TVS arrays designe...
Description
PRODUCTS - RailClamp PROTECTION www.DataSheet4U.com Description
RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClampTM0544M has a typical capacitance of only 0.30pF. This means it can be used on circuits operating in excess of 2GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). These devices are in a MSOP 10L package and feature a lead-free, matte tin finish. They are compatible with both lead free and SnPb assembly techniques. They are designed for easy PCB layout by allowing the traces to run straight through the device. The combination of small size, low capacitance, and high level of ESD protection makes them a flexible solution for protecting high-speed HDMI and DVI video interfaces.
RailClamp ESD Protection for HDMI Interfaces
PRELIMINARY Features
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±18kV (air), ±12kV (contact) IEC 61000-4-5 (Lightning) 5A (8/20µs) IEC 61000-4-4 (EFT) 40A (5/50ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects four I/O lines and one Vcc line Low capacitance: 0.3pF typ...
Similar Datasheet