Document
www.DataSheet4U.com
SPECIFICATIONS FOR STANDARD LED LAMPS
L
101
Series
WENRUN
OPTOELECTRONIC
WENRUN LED Lamps
www.DataSheet4U.com
L
101
Series
Features:
High speed response. High reliability and long life. Low power consumption. Available in red,blue,white ,green, yellow colors. Suitable for pulse operation.
Descriptions:
The LED lamps are available with different colors,intensities,epoxy colors,etc. Superior performance in outdoor environment.
Applications:
These lamp are widely used for various application. Indication of all kinds. Commercial use.
Selection Guide:
Chip Part No. Material LG10140 LY10140 LSR10140 LI10140 GaP GaAsP/GaP GaAlAs GaAsP Emitting Color Green Yellow Super Red Orange Green Diffused Yellow Diffused Red Diffused Red Diffused Lens Type
Prepared date
June 2005
http://www.wenrun.com
Rev.
3
Page 1of 5
WENRUN LED Lamps
www.DataSheet4U.com
L
101
Series
Package Dimensions:
2.54 typ 0.5 typ
1.5max 1 2.0 4.8 2
1.0min 25.0min
3.5
4.5
2.5
1.ANODE
2.0 2.4
2.CATHODE
NOTES 1 2 3 All dimensions are in millimetres (mm). Tolerance is 0.25mm(0.01”) unless otherwise noted. Protruded resin under flange is 1.5mm Max LED.
Absolute Maximum Rating
Parameter Power Dissipation Pulse Forward Current IFP (Duty 1/10 @ 1kHz) Continuous Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Soldering Temperature Notes Soldering time 5 seconds. IF VR Topr Tstg Tsol
Ta=25
Green 60 Yellow 60 Super Red 50 Orange 60 Unit mW
Symbol Pd
70 20 5
70 20 5 -30 -40 260 +85
70 20 5
70 20 5
mA mA V
+100 5
Prepared date
June 2005
http://www.wenrun.com
Rev.
3
Page 2of 5
WENRUN LED Lamps
www.DataSheet4U.com
L
101
Series
Electrical Optical Characteristics
Green Yellow Typ. 8.0 Symbol Typ. Max.
--
Ta=25
Super Red Typ. 9.0 Max. -Orange Unit Typ. 8.5 Max. -mcd Test Condition IF=20mA
Parameter Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength Peak Emission Wavelength Spectral Line Half Width Viewing Angle
Max. --
IV
9.0
VF
2.2
2.5
2.0
2.5
1.85
2.3
2.0
2.5
V
IF=20mA
IR
--
50
--
50
--
50
--
50
uA
VR=5V
d
565
--
585
--
645
--
630
--
nm
IF=20mA
P
562
--
588
--
655
--
636
--
nm
IF=20mA
30 2
1/2
---
30 130
---
30 130
---
30 130
---
nm deg
IF=20mA IF=20mA
130
Reliability Test Items and Conditions
NO Test Item -40 30min Test Conditions 25 5min 100 30min 25 5min Duration Sample Ac/Re
1
Temperature Cycle
50clycles
100
0/1
2
High Temp. Storage
Ta=100 Ta=85 RH=85% Ta=-40 Ta=25 5 DC IF=20mA Tsol=260 5 10s
1000hours
100
0/1
3
Temp.& Humidity Test
1000hours
100
0/1
4
Low Temp. Storage
1000hours
100
0/1
5
Operating Life Test
1000hours
100
0/1
6
Solder Heat
1times
20
0/1
Prepared date
June 2005
http://www.wenrun.com
Rev.
3
Page 3of 5
WENRUN LED Lamps
www.DataSheet4U.com
L
101
Series
Typical Electro-Optical Characteristics Curves
Relative Luminous Intensity (%)
100
Relative Luminous Int.