Document
ProLite 1W SMD Star
www.DataSheet4U.com
BTP-99XXCT-XX-X/W
Package Dimension
Features
Highest Lumen Per Watt
Long Operational Life White Housing Superior ESD Protection
Instant Light (less than 100ns) Compatible to Luxeon’s “Lambertian” True SMD Emitter
Note: Lens is low dome profile
Tolerance: ± see spec Unit: mm
Applications
Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Marine/Miner’s Lighting Portable Flashlight/ General Lighting
Optical Characteristics at TJ=25ºC, IF=350mA
PART NUMBER Emitting Color LED Chip Material Lens Color Water Clear AlInGaP Water Clear Water Clear Water Clear Water Clear AlInGaN Water Clear Water Clear Wavelength (nm) CCT (K) Range Min BTP-99NRCT-XX-X/W BTP-99AMCT-XX-X/W BTP-99YECT-XX-X/W BTP-99BLCT-XX-X/W BTP-99PGCT-XX-X/W BTP-99WWCT-XX-X/W BTP-99WHCT-XX-X/W
Notes: 1) 2) 3) 4) Picture for illustration purpose only. Please refer to outline dimension for actual package size.
Drive Voltage @ 350mA Typ. 2.40V 2.40V 2.40V 3.50V 3.50V 3.50V 3.50V
Luminous Flux (lm) @350mA Typ. 30 lm 36 lm 30 lm 10 lm 30 lm 20 lm 25 lm
VIEW ANGLE 2θ1/2 (deg)
Max 635 620 595 475 540 3800K 8000K
Normal Red Amber Yellow Blue Green Warm White White
620 610 585 460 520 2800K 5000K
140
Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 1 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
www.DataSheet4U.com
BTP-99XXCT-XX-X/W
Absolute Maximum Ratings at TJ=25ºC
Parameter Red/Amber/Yellow White/Blue/Green
Power Dissipation (W) DC Forward Current (mA)
[1] [4]
1.00 350 500 350 5 50 16,000
[3]
1.22 350 500 350 5 50 16,000 135 15 -2 -40 to +105 -40 to +105
Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) ESD Sensitivity (V) [2]
LED Junction Temperature at 350mA (°C) Temperature Coefficient of VF (mV/°C) Storage Temperature (°C) Operating Temperature (°C) Lead Soldering Temperature (°C)[4]
120 15 -2 -40 to +105 -40 to +105
Thermal Resistance Junction to Board (°C/W)
260°C for 5 seconds max 260°C for 5 seconds max
Application Notes: 1. 2. 3. 4. 5. Proper forward current must be observed to maintain the junction temperature below maximum rating Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be fully taken when handling products Specification is subjected to change for improvements without notice. Test conditions: tp≤10us, duty cycle = 0.005 CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 2 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
www.DataSheet4U.com
BTP-99XXCT-XX-X/W
CCT, Flux and VF Selection Guide (@ TJ = 25ºC, IF=350mA)
BTP-99XXCT-XX-X/W
White Housing
Wavelength Ranks Selection
Flux Ranks Selection
Color
Bin B5 B6 B7 XX G6 G7 G8 G9 XX XX XX XX
λD(nm)
Min Max
460 465 465 470 470 475 460 – 475 515 520 520 525 525 530 530 535 515 – 535 620 – 630 610 – 620 585 – 595
Color
Bin H J K X M
Flux (lumens)
4.5~6 6~8 8~10 Default Full Range 14~18 18~23 23~30 30~39 39~50 Default Full Range
Blue
Blue
Green
Red Amber Yellow
Red Amber Yellow Green White
N P Q R X
CCT Ranks Selection
VF Ranks Selection Color
Red Amber Yellow
Color Temp
Warm White
Bin 00 01 XX 02 03 04 XX
CCT(K) Min Max
2800 3300 5000 6000 7000 3300 3800 6000 7000 8000
Bin
V04 V05 V06 V07 VXX(Full) V08 V09 V10 V11 V12 VXX(Full)
VF (V) Min Max
2.0 2.2 2.2 2.4 2.4 2.6 2.6 2.8 2.0~2.8 2.8 3.0 3.0 3.2 3.2 3.4 3.4 3.6 3.6 3.8 2.8~3.8
2800K – 3800K
White
5000K – 8000K
White Blue Green
(Please specify on order, otherwise, default full range of VF)
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 3 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
www.DataSheet4U.com
BTP-99XXCT-XX-X/W
Typical Radiation Pattern
100 90 80 70 60 50 40 30 20 10 0 -100
R e la t iv e I n t e n s it y (% )
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement(Degree)
Fig. 1 Typical Radiation Pattern
Operating Current & Ambient Temperature
2a.
2b.
Fig. 2 Forward Current vs Ambient Temperature
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 4 of 8
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
ProLite 1W SMD Star
www.DataSheet4U.com
BTP-99XXCT-XX-X/W
Part No.: BTP-99XXCT-XX-X/W
Rev1.2005
Page 5 of 8
DB LECTRO Inc..