Change Summary
OZ9910
Recipient #102238 printed on 1/4/2005. This is a ONE-TIME copy. Updates will not be provided.
www.DataSheet4U.com...
Description
OZ9910
Recipient #102238 printed on 1/4/2005. This is a ONE-TIME copy. Updates will not be provided.
www.DataSheet4U.com
Change Summary
Description Change “74uA” to “80uA” in last sentence of last paragraph Modify Pin 5, 6, 7, 8, 9, 11 pin descriptions a. Change “VIN” range, b. Add “Analog Dimming” range, c. update “Thermal Impedance”. a. Update general test conditions, b. Update “Normal operating frequency” test conditions, Min, Typ & Max limits, c. Update “Striking frequency” test conditions, Min, Typ & Max limits, d. Delete “Ramp peak”, “Ramp Valley” & “Temp stability”, e. Update “Operating frequency” test conditions, Min, Typ & Max limits, f. Update “Ramp peak” Min, Typ & Max limits, g. Update “Ramp valley” Min, Typ & Max limits, h. Delete “Analog dimming range”, i. Update “ISEN reference voltage” Min & Max limits, j. Update “VSEN reference voltage” Min & Max limits, k. Update “Standby current” test conditions, Typ & Max limits, l. Update “Operation current” Max limit, m. Update “REF voltage” Min, Typ & Max limits, n. Update “HSB voltage” Min, Typ & Max limits, o. Update “NDR-PDR output” Max limits, p. Delete “Min. Overlap between diagonal switches”, q. Update “Max. Overlap between diagonal switches” Min & Typ limits, r. Update “Brake before make” Min, Typ & Max limits, s. Update “Timer” Min, Typ & Max limits Update formula in No. 4. Ignition Miscellaneous corrections. Page(s) 1 3 3
CHANGES
No. 1. 2 3 Applicable Section General Description Pin Description Recommended Op...
Similar Datasheet