E2561-Series 10 Gb/s EML Modules
for up to 80 km Transmission
Laser Safety Information
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are classified Class 3B laser products consistent with IEC ® 60825-1: 1993. This
device family has been classified with the FDA under accession number 8720010. Measurements were made to
classify the product per IEC60825-1: 1993.
This product complies with 21 CFR 1040.10 and 1040.11.
8.8/125 µm single-mode fiber pigtail and connector.
Wavelength = 1.5 µm
Maximum power = 10 mW.
Because of size constraints, laser safety labeling (including an FDA Class IIIb label) is not affixed to the module but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
Class IIIb Laser Product per CDRH, 21 CFR 1040 Max. Output: 10 mW Wavelength: 1.5 µm
CAUTION: This device is susceptible to damage as a result of electrostatic discharge. Take proper precau-
tions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108-A
TriQuint employs a human-body model (HBM) for ESD-susceptibility testing and protection-design evaluation.
ESD voltage thresholds are dependent on the critical parameters used to define the model. A standard HBM
(resistance = 1.5 kΩ, capacitance = 100 pF) is widely used and can be used for comparison purposes.
For additional information and latest specifications, see our website: www.triquint.com