TMP86F809NG

8 Bit Microcontroller TLCS-870/C Series TMP86F809NG Date 2006/10/1 2007/2/14 2007/2/14 2007/2/20 2008/8/29 2008/8/29 2013/1/31 Revision History Revision 1 First Release 2 Periodical updating. No change in contents. 3 Periodical updating. No change in contents. 4 Contents Revised 5 Contents Revised 6 Contents Revised 7 Contents Revised Caution in Setting the UART Noise Rejection Time When UART is used, settings of RXDNC are limited depending on the transfer clock specified by BRG. The combination "O" is available but please do not select the combination "–". The transfer clock generated by timer/counter interrupt is calculated by the following equation : Transfer clock [Hz] = Timer/counter source clock [Hz] ÷ TTREG set value BRG setting Transfer clock [Hz] 000 fc/13 110 (When the transfer clock generated by timer/counter interrupt is the same as the right side column) fc/8 fc/16 fc/32 The setting except the above 00 (No noise rejection) O O O RXDNC setting 01 (Reject pulses shorter than 31/fc[s] as noise) 10 (Reject pulses shorter than 63/fc[s] as noise) O O – – O – 11 (Reject pulses shorter than 127/fc[s] as noise) – – – O O O – O O O O Table of Contents TMP86F809NG 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 Block Diagr...