ULTRA LOW POWER CMOS STATIC RAM
IS62WV2568ALL IS62WV2568BLL
www.DataSheet4U.com
ISSI
JUNE 2005
®
256K x 8 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RA...
Description
IS62WV2568ALL IS62WV2568BLL
www.DataSheet4U.com
ISSI
JUNE 2005
®
256K x 8 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM
FEATURES
High-speed access time: 55ns, 70ns CMOS low power operation – 36 mW (typical) operating – 9 µW (typical) CMOS standby TTL compatible interface levels Single power supply – 1.65V--2.2V VCC (62WV2568ALL) – 2.5V--3.6V VCC (62WV2568BLL) Fully static operation: no clock or refresh required Three state outputs Industrial temperature available Lead-free available
DESCRIPTION
The ISSI IS62WV2568ALL / IS62WV2568BLL are highspeed, 2M bit static RAMs organized as 256K words by 8 bits. It is fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields highperformance and low power consumption devices. When CS1 is HIGH (deselected) or when CS2 is LOW (deselected) or when CS1 is LOW, CS2 is HIGH, the device assumes a standby mode at which the power dissipation can be reduced down with CMOS input levels. Easy memory expansion is provided by using Chip Enable and Output Enable inputs. The active LOW Write Enable (WE) controls both writing and reading of the memory. The IS62WV2568ALL and IS62WV2568BLL are packaged in the JEDEC standard 32-pin TSOP (TYPE I), sTSOP (TYPE I), and 36-pin mini BGA.
FUNCTIONAL BLOCK DIAGRAM
A0-A17
DECODER
256K x 8 MEMORY ARRAY
VCC GND I/O DATA CIRCUIT
I/O0-I/O7
COLUMN I/O
CS2 CS1 OE WE CONTROL CIRCUIT
Copyright © 2002 Integrated...
Similar Datasheet