Document
Part Number:
www.SunLED.com
www.DataSheet4U.com
ZMO54W
2.0x1.25mm SMD CHIP LED LAMP
Features
z z z z z z z z
2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg MO (InGaAlP) 5 30 195 75 -40 ~ +85 -40 ~ +85 Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR MO (InGaAlP) 2.0 2.5 10
Unit V mA mA mW °C
Unit V V uA
λP
610
nm
λD
601
nm
Δλ
29
nm
C
30
pF
Part Number
Emitting Color
Emitting Material
Lens-color
Luminous Intensity (IF=20mA) mcd min. typ. 198
Wavelength nm λP
Viewing Angle 2 θ 1/2
ZMO54W
Orange
InGaAlP
Water Clear
70
610
120°
Published Date : FEB 26,2008
Drawing No : SDSA2431
V5
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
www.DataSheet4U.com
ZMO54W
2.0x1.25mm SMD CHIP LED LAMP
MO
Published Date : FEB 26,2008
Drawing No : SDSA2431
V5
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
www.DataSheet4U.com
ZMO54W
2.0x1.25mm SMD CHIP LED LAMP
Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1)
The device has a single mounting surface. The device must be mounted according to the specifications.
Tape Specification (Units : mm)
Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26,2008 Drawing No : SDSA2431 V5 Checked : B.L.LIU P.3/4
Part Number:
www.SunLED.com
www.DataSheet4U.com
ZMO54W
2.0x1.25mm SMD CHIP LED LAMP
PACKING & LABEL SPECIFICATIONS
ZMO54W
Published Date : FEB 26,2008
Drawing No : SDSA2431
V5
Checked : B.L.LIU
P.4/4
.