Low Capacitance TVS
www.datasheet4u.com
Low Capacitance TVS for Ethernet and Telecom Interfaces
Features
Transient protection for high-sp...
Description
www.datasheet4u.com
Low Capacitance TVS for Ethernet and Telecom Interfaces
Features
Transient protection for high-speed data lines to
Bellcore 1089 (Intra-Building) 100A (2/10μs) IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) L5, 95A (8/20μs) Low capacitance (12pF line-to-line) Low operating voltages (2.5V) Low clamping voltage Small SLP Package saves board space Solid-state technology
TClamp2502N
PROTECTION PRODUCTS - TransClampΤΜ Description
A TransClampΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and Lightning. These devices integrate low capacitance, surge-rated compensation diodes with a high power transient voltage suppressor (TVS). The compensation diodes are arranged in a bridge pattern allowing the device to be connected in common mode and/or differential mode. This allows the designer maximum flexibility and reduces parts count. The capacitance of the device is limited to 12pF maximum from line-to-line to ensure correct signal transmission on high-speed lines. These devices may be used to meet Telcordia GR-1089CORE short-haul (intra-building) surge requirements and will withstand a minimum 100 A surge for a 2/10μs pulse. The TClampTM2502N is in a 10-pin, ...
Similar Datasheet