MAX9597

19-4159; Rev 1; 10/08 KIT ATION EVALU E L B AVAILA Low-Power Audio/Video Interface for Single SCART Connectors General Description ♦ 5µW Shutdown Consumption ♦ Audio Operational Amplifiers to Create Input Filters ♦ Clickless/Popless, DirectDrive Audio ♦ Video Reconstruction Filter with 10MHz Passband and 43dB Attenuation at 27MHz ♦ 3.3V and 12V Supply Voltages www.datasheet4u.com Features ♦ 53mW Quiescent Power Consumption MAX9597 The MAX9597 single SCART interface routes audio and video signals between a set-top box decoder chip and an external SCART connector under I 2 C control. Operating from a 3.3V supply and a 12V supply, the MAX9597 consumes 53mW during quiescent operation and 254mW during average operation when driving typical signals into typical loads. The MAX9597 audio section contains left and right audio paths with an independent operational amplifier at the inputs. The DirectDrive ® output amplifiers create a 2VRMS full-scale audio signal biased around ground, eliminating the need for bulky output capacitors and reducing click-and-pop noise. The zero-cross detection circuitry also further reduces clicks and pops by enabling audio sources to switch only during a zerocrossing. The MAX9597 video section contains 4 channels of video filter amplifiers. The standard-definition video signals from the set-top box decoder chip are lowpass filtered to remove out-of-bandwidth artifacts. The MAX9597 also supports slow-switching and fast-switching signals. The MAX9597 ...