Op Amps
®
Data Sheet
ISL28148, ISL28248, ISL28448
September 21, 2010
FN6337.4
4.5MHz, Single Dual and Quad Precision Rail-to...
Description
®
Data Sheet
ISL28148, ISL28248, ISL28448
September 21, 2010
FN6337.4
4.5MHz, Single Dual and Quad Precision Rail-to-Rail Input-Output (RRIO) Op Amps with Very Low Input Bias Current
The ISL28148, ISL28248 and ISL28448 are 4.5MHz low-power single, dual and quad operational amplifiers. The parts are optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries.
The single, dual and quad feature an Input Range Enhancement Circuit (IREC) which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail.
The parts draw minimal supply current (900µA per amplifier) while meeting excellent DC accuracy, AC performance, noise and output drive specifications. The ISL28148 features an enable pin that can be used to turn the device off and reduce the supply current to a maximum of 16µA. Operation is guaranteed over -40°C to +125°C temperature range.
Features
4.5MHz gain bandwidth product 900µA supply current (per amplifier) 1.8mV maximum offset voltage 1pA typical input bias current Down to 2.4V single supply operation Rail-to-rail input and output Enable pin (ISL28148 SOT-23 package only) -40°C to +125°C operation Pb-free (RoHS compliant)
Applications
Low-end audio 4m...
Similar Datasheet