F801FA60

Freescale Semiconductor, Inc. DSP56F801/D Rev. 13.0, 02/2004 56F801 www.datasheet4u.com Technical Data 56F801 16-bit Hybrid Controller Up to 30 MIPS operation at 60MHz core frequency Up to 40 MIPS operation at 80MHz core frequency DSP and MCU functionality in a unified, C-efficient architecture MCU-friendly instruction set supports both DSP and controller functions: MAC, bit manipulation unit, 14 addressing modes Hardware DO and REP loops 6-channel PWM Module Two 4-channel, 12-bit ADCs Serial Communications Interface (SCI) 6 PWM Outputs 8K × 16-bit words Program Flash 1K × 16-bit words Program RAM 2K × 16-bit words Data Flash 1K × 16-bit words Data RAM 2K × 16-bit words Boot Flash Serial Peripheral Interface (SPI) General Purpose Quad Timer JTAG/OnCETM port for debugging On-chip relaxation oscillator 11 shared GPIO 48-pin LQFP Package Freescale Semiconductor, Inc... PWMA RESET IRQA 6 JTAG/ OnCE Port VCAPC VDD 2 4 VSS 5* Digital Reg Analog Reg VDDA VSSA Fault Input 4 4 A/D1 A/D2 VREF ADC Interrupt Controller Low Voltage Supervisor Program Controller and Hardware Looping Unit Address Generation Unit Data ALU 16 x 16 + 36 → 36-Bit MAC Three 16-bit Input Registers Two 36-bit Accumulators Bit Manipulation Unit Quad Timer C Quad Timer D or GPIO Program Memory 8188 x 16 Flash 1024 x 16 SRAM Boot Flash 2048 x 16 Flash Data Memory 2048 x 16 Flash 1024 x 16 SRAM PAB PDB IPBB CONTROLS 16 PLL 3 XDB2 CGDB XAB1...