Rev 1; 2/08
Smart Card Interface
General Description
The DS8113 smart card interface is a low-cost, analog front-end fo...
Rev 1; 2/08
Smart Card Interface
General Description
The DS8113 smart card interface is a low-cost, analog front-end for a smart card reader, designed for all ISO 7816, EMV™, and GSM11-11 applications. The DS8113 www.datasheet4u.com supports 5V, 3V, and 1.8V smart cards. The DS8113 provides options for low active- and stop-mode power consumption, with as little as 10nA stop-mode current. The DS8113 is designed to interface between a system microcontroller and the smart card interface, providing all power supply, ESD protection, and level shifting required for IC card applications. An EMV Level 1 certified library (written for the MAXQ2000 microcontroller) and hardware reference design is available. Contact Maxim technical support at
[email protected] regarding requirements for other microcontroller platforms. An evaluation kit, DS8113-KIT, is available to aid in prototyping and evaluation.
Features
o Analog Interface and Level Shifting for IC Card Communication o 8kV (min) ESD (IEC) Protection on Card Interface o Ultra-Low Stop-Mode Current, Less Than 10nA Typical o Internal IC Card Supply-Voltage Generation: 5.0V ±5%, 80mA (max) 3.0V ±8%, 65mA (max) 1.8V ±10%, 30mA (max) o Automatic Card Activation and Deactivation Controlled by Dedicated Internal Sequencer o I/O Lines from Host Directly Level Shifted for Smart Card Communication o Flexible Card Clock Generation, Supporting External Crystal Frequency Divided by 1, 2, 4, or 8 o High-Current, Short-Circuit and High-...