Document
www.DataSheet4U.com
ADJD-MJ50 / ADJD-MJ51 and ADJD-MJ60 / ADJD-MJ61
High Performance RGB LED Light Source
Data Sheet
Description
Avago RGB LED Light Source is a high performance device which can be operated at high driving current. It comes with a plug-and-play electrical connector. The built-in heat sink and the mechanical mounting features simplify the thermal management of a lighting solution. This enables effective heat transfer and maintain LED junction below maximum allowed temperature. The footprint of the top emitting package is 100mm x 18mm x 3.6mm with aperture of 96mm x 6mm. The footprint of side emitting package is 100mm x 18mm x 8mm with aperture of 96mm x 4.6mm. The reflector cavity design maximized the light extraction as well as maximized the color mixing to produce the required color. Together with closely pitched LED dice, the color mixing is best of its class.
Features
• High flux output • Choice of top emitting or side emitting • Compact footprint for ease of stacking horizontally and vertically. • Integrated heatsink to simplify thermal management • Red, Green & Blue color premix in the reflector cavity to produce required color • Silicone encapsulation for extra long product life • Plug and play mechanical mounting and electrical connection (connector interface) • Fully serviceable due to ease of mounting and demounting.
Applications
• Decorative lighting • Architectural lighting • Specialty lighting
CAUTION: ADJD-MJ50/51 & ADJD-MJ60/61 are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details
www.DataSheet4U.com
Package Dimensions
ADJD-MJ50 and ADJD-MJ51 (Top Emitting)
LED die position 1
100.00 97.00
LED die position 50
(4.41) 12.00 18.00
7.29
17.15 14.00 19.00
3D VIEW
19.00 14.00
TOP VIEW
Connector Connector Pin 1 Pin 8
34.00
3.60
2.00
15.00
96.00
BOTTOM VIEW
Dr & Tap For M3 Screw (4X)
2.00
SIDE VIEW
ADJD-MJ60 and ADJD-MJ61 (Side Emitting)
Connector Pin 8
14.00 19.00 34.00 16.15
Connector Pin 1
19.00 14.00
TOP VIEW
Dr & Tap For M3 Screw (4X)
12.00
18.00
18.00
3D VIEW LED die position 1
8.00
LED die position 50
100.00 98.00
2.00
46.65
0.70
FRONT VIEW
1.00 15.00 96.00 2.00
2.00
2.00
BOTTOM VIEW
Notes: 1. All Dimensions are in millimeters. 2. Tolerance = ±0.20 mm unless otherwise specified.
4.67 6.00
www.DataSheet4U.com
Color Configuration
Electrical Configuration
Pin 1 G1 + Pin 2 R+ Pin 3 B+ Pin 4 G2 +
Male Connector
Connector and Pin Configuration
Pin Number 1 2 3 4 5 6 7 8
G1 Pin 5 RPin 6 BPin 7 G2 Pin 8
Configuration G1 + R+ B+ G2 + G1 RBG2 -
Recommended female connector: Molex 51146-0800
*Note: This cable is only applicable for ADJD-MJ51 and ADJD-MJ61
www.DataSheet4U.com
Table 1. Absolute Maximum Ratings (Tj = 25°C) Parameter DC forward current [1] [2] [3] Power dissipation Maximum junction temperature Tj max Operating board temperature, TB range [4] Storage temperature range Red 300 10.5 120 - 40 to + 85 - 40 to + 85 Green & Blue 150 6.75 Unit mA W °C °C °C
Note: 1. Per individual string. 2. Derate linearly as shown in Figure 6. 3. Operation at current below 20 mA is not recommended. 4. Board temperature, TB = temperature of the metal core PCB at the bottom of the LED.
Table 2. Electrical Characteristics (Tj = 25°C) Forward Voltage, VF (V) [1] [2] Color AlInGaP Red InGaN Green G1 InGaN Green G2 InGaN Blue Min. 25 30 30 30 Typ. 29 35 35 35 Max. 35 45 45 45 Testing Current, IF (mA) [1] 300 150 150 150 Dynamic Resistance, RD (W) [3] [4] 26 31 31 31
Note: 1. Per individual string. 2. VF tolerance is ±1.0V. 3. Measured at Tj = 25ºC, applicable from IF = 50mA onwards. 4. Dynamic resistance is the inverse slope of the forward current vs. forward voltage characteristic as in Figure 3.
Table 3. Luminous Flux Luminous Flux fv (lm) [1] [2] @ Tj = 25°C Min. 130 75 75 12 Typ. 200 125 125 30 White fv at 9000K color temperature, TB = 70°C [3] [4] [5] Typ. 310
Color AlInGaP Red InGaN Green G1 InGaN Green G2 InGaN Blue
Testing Current, IF (mA) 300 150 150 150
Note: 1. fV is the total luminous flux output as measured with an integrating sphere per individual string. 2. fV tolerance ± 15%. 3. White point at 9000K color temperature according to CIE 1931: (0.285, 0.300). 4. When the LEDs are tuned to 9000K color temperature at TB = 70°C, not all LED strings will be driven at its maximum forward current. 5. Board temperature, TB = temperature of the metal core PCB at the bottom of the LED.
www.DataSheet4U.com
Table 4. Optical Characteristics (Tj = 25°C) Chromaticity Coordinates [1] Typ. x 0.684 0.191 0.191 0.153 y 0.315 0.715 0.715 0.033 Peak Wavelength, lp (nm) Typ. 626 523 523 451 Spectral Width at Half Max, Dl1/2 (nm) [2] Typ. 20 35 35 24
Color AlInGaP Red InGaN Green G1 InGaN Green G2 InGaN Blue
Testing Current, IF (mA) 300 150 150 150
Dominant Wavelength, ld (nm) [1] Min. 615 520 520 4.