3V Operation Switching Driver for Class D Amplifier
NJU8711
www.DataSheet4U.com
3V Operation Switching Driver for Class D Amplifier
GENERAL DESCRIPTION
The NJU8711 is a Sw...
Description
NJU8711
www.DataSheet4U.com
3V Operation Switching Driver for Class D Amplifier
GENERAL DESCRIPTION
The NJU8711 is a Switching Driver for class D Amplifier including BEEP and BPZ (Bipolar Zero) output circuits. It converts 1bit digital signal input, such as PWM or PDM signal, to analog signal output with simple external LC low-pass filter. The NJU8711 realizes very high power-efficiency by class D operation. Therefore, It is suitable for portable audio set and others.
PACKAGE OUTLINE
NJU8711V
FEATURES
2-channel 1bit Audio Signal Input Standby(Hi-Z), BPZ Control Internal BPZ Charger Beep Function Operating Voltage : 2.0V to 3.6V CMOS Technology Package Outline : SSOP10
PIN CONFIGURATION
EN1 MCK VDD BEEP EN2 1 2 3 4 5 10 9 8 7 6 OUT2 IN2 VSS IN1 OUT1
BLOCK DIAGRAM
VDD VSS
BPZ Output
IN1
OUT1
BEEP
IN2
Output Control BPZ Output
OUT2
MCK
EN1
EN2
Ver.2004-06-02
-1-
NJU8711
www.DataSheet4U.com
TERMINAL DESCRIPTION
No. 3 8 2 1 5 7 9 4 SYMBOL VDD VSS MCK EN1 EN2 IN1 IN2 BEEP I/O I I I I Function Power Supply, VDD=3V Power GND, VSS=0V Master Clock Input Terminal
The condition of the data input terminal is fetched with the rising edge of this signal.
Output Control Terminal Output circuit is selected by the condition of this terminal. Audio Signal Input Terminal 1-bit Audio Signal inputs into this terminal. Beep Signal Input Terminal Beep signal inputs into this terminal. Output Terminal When Output Terminal selects Audio Signal, IN1 terminal input data outputs from...
Similar Datasheet