Operational Amplifiers. TSV612 Datasheet
(TSV611 / TSV612) Operational Amplifiers
|Total Page||16 Pages|
Rail-to-rail input/output 11 µA, 120 kHz
CMOS operational amplifiers
■ Rail-to-rail input and output
■ Low power consumption: 11 µA typ at 5 V
■ Low supply voltage: 1.5 to 5.5 V
■ Gain bandwidth product: 120 kHz typ
■ Unity gain stable
■ Low input offset voltage: 1 mV max (A version)
■ Low input bias current: 1 pA typ
■ Temperature range: -40 to +85° C
■ Battery-powered applications
■ Portable devices
■ Signal conditioning
■ Active filtering
■ Medical instrumentation
TSV611ILT - TSV611ICT
SOT23-5 / SC70-5
TSV612IST - TSV612ID/DT
_ 6 In2-
+ 5 In2+
MSO8 / SO8
The TSV61x family of single and dual operational
amplifiers offers low voltage, low power operation
and rail-to-rail input and output.
The devices also feature an ultra-low input bias
current as well as a low input offset voltage.
The TSV61x have a gain bandwidth product of
120 kHz while consuming only 11 µA at 5 V.
These features make the TSV61x family ideal for
sensor interfaces, battery-supplied and portable
applications, as well as active filtering.
Doc ID 15768 Rev 1
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
www.DatAaSbshoeelut4teUm.coamximum ratings and operating conditions
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Differential input voltage (2)
Input voltage (3)
Thermal resistance junction to ambient(4)(5)
Maximum junction temperature
HBM: human body model(6)
MM: machine model(7)
CDM: charged device model(8)
VCC- -0.2 to VCC++0.2
-65 to +150
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. Vcc-Vin must not exceed 6 V.
4. Short-circuits can cause excessive heating and destructive dissipation.
5. Rth are typical values.
6. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
7. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two
pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
8. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to ground.
Table 2. Operating conditions
Common mode input voltage range
Operating free air temperature range
1.5 to 5.5
VCC- -0.1 to VCC+ +0.1
-40 to +85
2/16 Doc ID 15768 Rev 1
|Features||Datasheet pdf www.DataSheet4U.com TSV611, TSV612 Rail -to-rail input/output 11 µA, 120 kHz C MOS operational amplifiers Preliminary data Features ■ ■ ■ ■ ■ ■ ■ ■ Rail-to-rail input and output Low power consumption: 11 µA typ at 5 V Low supply voltage: 1.5 to 5.5 V Gain bandwidth product: 120 kHz typ Unity g ain stable Low input offset voltage: 1 mV max (A version) Low input bias curre nt: 1 pA typ Temperature range: -40 to +85° C TSV611ILT - TSV611ICT In+ 1 VD D 2 In- 3 5 VCC + _ 4 Out SOT23-5 / S C70-5 TSV612IST - TSV612ID/DT Out1 In1I n1+ VCC1 2 3 4 _ + _ + 8 7 6 5 VCC+ Out 2 In2In2+ Applications ■ ■ ■ ■ ■ Battery-powered applications Port able devices Signal conditioning Active filtering Medical instrumentation MSO 8 / SO8 Description The TSV61x family of single and dual operational amplifie rs offers low voltage, low power operat ion and rail-to-rail input and output. The devices also feature an ultra-low i nput bias current as well as a low input offset voltage. The TSV61x have a gain bandwidth pr.|
|Keywords||TSV612, datasheet, pdf, ST Microelectronics, TSV611, /, TSV612, Operational, Amplifiers, SV612, V612, 612, TSV61, TSV6, TSV, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute|