NJG1112PB1

NJG1112PB1 www.DataSheet4U.com PDC Dual Band LNA GaAs MMIC QGENERAL DESCRIPTION The NJG1112PB1 is a dual band low noise amplifier for 800MHz and 1500MHz band. The band switching between 800MHz CD, A Band and 1500MHz is made by 2 bit control signal by using inverter circuit included in this IC. The ultra small and thin FFP12-B1 is applied. QFEATURES OLow voltage operation OLow current consumption OLow control current OHigh gain OLow noise figure OHigh input IP3 OUltra small & thin package QPACKAGE OUTLINE NJG1112PB1 +2.8V typ. +2.6mA typ.@800MHz CD, A Band +2.8mA [email protected] Band 20uA typ. 18.5dB typ. @f=830MHz 18dB typ. @f=878MHz 17.5dB typ. @f=1490MHz 1.6dB typ. @f=830MHz 1.5dB typ. @f=878MHz 1.15dB typ. @f=1490MHz -7dBm typ. @f=830.0+830.1MHz -7dBm typ. @f=878.0+878.1MHz -5dBm typ. @f=1490.0+1490.1MHz FFP12-B1 (Package size: 2.0x2.0x0.85mm) QPIN CONFIGURATION (Top View) 9 8 7 10 11 12 6 5 4 1 2 3 Pin Connection 1.GND 2.VCTL1 3.VCTL2 4.VINV 5.RFOUT1(800MHz Band) 6.GND 7.RFOUT2(1.5GHz Band) 8.GND 9.RFIN3(1.5GHz Band) 10.RFIN2(800MHz A Band) 11.GND 12.RFIN1(800MHz CD Band) Note: The specifications and description listed in this catalog are subject to change without prior notice. -1- NJG1112PB1 www.DataSheet4U.com QABSOLUTE MAXIMUM RATINGS (Ta=25°C, Zs=Zl=50Ω) PARAMETERS Operating voltage Inverter supply voltage Control voltage Input power Power dissipation Operating temperature Storage temperature SYMBOL VDD VINV VCTL Pin PD Topr Tstg VDD=2.8V CONDITIONS RATINGS...