LNA Module. ALN0140WT Datasheet

ALN0140WT Module. Datasheet pdf. Equivalent

Part ALN0140WT
Description Internally Matched LNA Module
Feature plerowTM ALN0140WT www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-s.
Manufacture Advanced Semiconductor
Datasheet
Download ALN0140WT Datasheet



ALN0140WT
www.DataSheet4U.com
plerowTM ALN0140WT
Internally Matched LNA Module
Features
· S21 = 25.2 dB @ 125 MHz
= 24.8 dB @ 155 MHz
· NF of 0.7 dB over Frequency
· Unconditionally Stable
· Single 5V Supply
· High OIP3 @ Low Current
Description
The plerowTM ALN-series is the compactly designed surface-mount
module for the use of the LNA with or without the following gain blocks in
the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,
PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-
cation terminals, CATV and so on. It has an exceptional performance of
low noise figure, high gain, high OIP3, and low bias current. The stability
factor is always kept more than unity over the application band in order
to ensure its unconditionally stable implementation to the application
system environment. The surface-mount module package including the
completed matching circuit and other components necessary just in case
allows very simple and convenient implementation onto the system
board in mass production level.
Specifications (in Production)
Typ. @ T = 25°C, Vs = 5 V, Freq. =140 MHz, Zo.sys = 50 ohm
Parameter
Unit Specifications
Min Typ Max
Frequency Range
MHz
125
155
Gain
dB 24 25
Gain Flatness
dB
± 0.2
± 0.3
Noise Figure
dB
0.7 0.75
Output IP3 (1)
dBm 30 31
S11 / S22 (2)
dB
-12 / -18
Output P1dB
dBm 20 21
Switching Time (3)
µsec
Supply Current
mA
73 90
Supply Voltage
V
5
Impedance
50
Max. RF Input Power
dBm
C.W 23 ~ 25 (before fail)
Package Type & Size
mm Surface Mount Type, 10Wx10Lx3.8H
Operating temperature is -40°C to +85°C.
1) OIP3 is measured with two tones at an output power of +4 dBm / tone separated by 1 MHz.
2) S11/S22 (max) is the worst value within the frequency band.
3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS.
1-stage Single Type
More Information
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
Outline Drawing (Unit: mm)
plerow
ALN0140WT
ASB Inc.
(Top View)
Solder Stencil Area
(Bottom View)
(Side View)
Pin Number
2
5
6
Others
Function
RF In
RF Out
Vs
Ground
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
Ø0.4 plated thru holes to ground plane
1/4
(Recommended Footprint)
www.asb.co.kr
March 2009



ALN0140WT
www.DataSheet4U.com
Typical Performance
(Measured)
125~155
+5 V
S-parameters & K Factor
plerowTM ALN0140WT
Internally Matched LNA Module
S-parameters
Noise Figure
OIP3
P1dB
2/4
www.asb.co.kr
March 2009





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)