Wall-mounted type. GS12U Datasheet

GS12U type. Datasheet pdf. Equivalent

Part GS12U
Description 10 ~ 12WAC-DC Single Output Wall-mounted type
Feature www.DataSheet4U.com 10 ~ 12W AC-DC Single Output Wall-mounted type Features : Universal AC input / .
Manufacture Mean Well Enterprises
Datasheet
Download GS12U Datasheet



GS12U
www.DataSheet4U.com
10 ~ 12W AC-DC Single Output Wall-mounted type
GS12U series
Features :
Universal AC input / Full range
No load power consumption< 0.3W/240VAC
Pass energy star level IV for full series
Meet EISA 2007 (Energy Independence and Security Act)
2 pole USA plug
Class power (without earth pin)
Protections: Short circuit / Overload / Over Voltage / Over temperature
Fully enclosed plastic case
Approvals: UL / CUL / BSMI / CB / FCC
Pass LPS for full series
2 years warranty
SPECIFICATION
ORDER NO.
GS12U05-P1I GS12U07-P1I GS12U09-P1I GS12U12-P1I GS12U15-P1I GS12U18-P1I GS12U24-P1I
SAFETY MODEL NO.
GS12U05
GS12U07
GS12U09
GS12U12
GS12U15
GS12U18
GS12U24
DC VOLTAGE
5V 7.5V 9V 12V 15V 18V 24V
RATED CURRENT
2.0A
1.6A
1.33A
1.0A
0.8A
0.67A
0.5A
CURRENT RANGE
0 ~ 2.0A
0 ~ 1.6A
0 ~ 1.33A
0 ~ 1.0A
0 ~ 0.8A
0 ~ 0.67A
0 ~ 0.5A
OUTPUT
RATED POWER
10W 12W 12W 12W 12W
RIPPLE & NOISE (max.) Note.2 75mVp-p
90mVp-p
90mVp-p
120mVp-p
150mVp-p
VOLTAGE TOLERANCE Note.3 5.0% 4.0% 4.0% 3.0% 3.0%
LINE REGULATION Note.4 1.0% 1.0% 1.0% 1.0% 1.0%
LOAD REGULATION Note.5 5.0% 4.0% 4.0% 3.0% 3.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC 500ms, 20ms, 10ms/115VAC at full load
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
12.06W
180mVp-p
3.0%
1.0%
2.0%
12W
200mVp-p
3.0%
1.0%
2.0%
FREQUENCY RANGE
47 ~ 63Hz
EFFICIENCY (Typ.)
72%
75%
76%
77%
79%
80%
80%
INPUT
AC CURRENT
0.31A / 115VAC 0.16A / 230VAC
INRUSH CURRENT (max.) COLD START 25A / 115VAC 45A / 230VAC
LEAKAGE CURRENT (max.)
OVERLOAD
0.25mA / 240VAC
>105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
115% ~ 135%
Protection type : Clamp by zener diode
U1 Tj 140 typically (U1) Detect on main control IC
OVER TEMPERATURE Note.6
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
WORKING HUMIDITY
0 ~ +50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 40 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA22.2, BSMI CNS14336 approved
SAFETY &
EMC
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
EMI CONDUCTION & RADIATION Compliance to FCC part15 class B, EN55022, EN61204-3 class B, BSMI CNS13438
HARMONIC CURRENT
Compliance to EN61000-3-2,3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A
MTBF
1414.6Khrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
PACKING
65*47*26.5mm (L*W*H)
0.15Kg ; 100pcs / 16Kg / CARTON
PLUG
CONNECTOR
CABLE
Standard type P1I: 2.1 * 5.5 * 9.5mm turning fork type, center positive for stock ; Other type available by customer requested
Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% RH Ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 10% to 100% rated load.
6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification
provided by the IC manufacturer.
File Name:GS12U-SPEC 2008-05-06



GS12U
www.DataSheet4U.com
10 ~ 12W AC-DC Single Output Wall-mounted type
Mechanical Specification
30 10mm
UL1185 18AWG 1230 50mm for 5V
UL1185 18AWG 1830 50mm for others
GS12U series
Unit:mm
6.3 0.3
65 1
1.5 0.2
12.7 0.4
Derating Curve
100
70
0 10 20 30 40 50
Ta ( )
Plug Assignment
Standard plug: P1I (option)
P1I
P/N OUTPUT
CENTER
+
ID 2.1 x OD 5.5
C"+"
9.5 0.5mm
Static Characteristics(24V)
32
28
24
20
16
12
8
Ta=25
300
250
200
150
100
50
25
50 70 90 110 120 140 160 180 200 220 240 264
INPUT VOLTAGE(VAC)60Hz
File Name:GS12U-SPEC 2008-05-06





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)