AS5163

AS5040 8-bit Programmable Magnetic Rotary Encoder www.DataSheet4U.com AS5163 14 bit Programmable Magnetic Angle Position Encoder AS5163-AB-1.1 Adapterboard OPERATION MANUAL 1 General Description The AS5163 is a contactless magnetic angle position sensor for accurate angular measurement over a full turn of 360°. A sub range can be programmed to achieve the best resolution for the application. It is a system-on-chip, combining integrated Hall elements, analog front end, digital signal processing and best in class automotive protection features in a single device. To measure the angle, only a simple two-pole magnet, rotating over the center of the chip, is required. The magnet may be placed above or below the IC. The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 0.022° = 16384 positions per revolution. According to this resolution the adjustment of the application specific mechanical positions are possible. The angular output data is available over a 14 bit digital protocol, a 12 bit PWM signal or 12 bit ratiometric analog output. The AS5163 operates at a supply voltage of 5 V and the supply and output pins are protected against overvoltage up to +27 V. In addition the supply pins are protected against reverse polarity up to – 18 V. 2 The AS5163 Adapter board 2.1 Board description The AS5163 adapter board is a simple circuit allowing test and evaluation the rotary encoder quickly without building a test fixture ...