L5985
2 A step-down switching regulator
Datasheet - production data
VFQFPN8 3 mm x 3 mm
Industrial: chargers, PLD,...
L5985
2 A step-down switching
regulator
Datasheet - production data
VFQFPN8 3 mm x 3 mm
Industrial: chargers, PLD, PLA, FPGA
Networking: XDSL, modems, DC-DC modules
Computer: optical storage, hard disk drive, printers, audio/graphic cards
LED driving
Features
2 A DC output current 2.9 V to 18 V input voltage Output voltage adjustable from 0.6 V 250 kHz switching frequency, programmable
up to 1 MHz Internal soft-start and inhibit Low dropout operation: 100% duty cycle Voltage feedforward Zero load current operation Overcurrent and thermal protection VFQFPN8 3 mm x 3 mm package
Description
The L5985 is a step-down switching
regulator with a 2.5 A (min.) current limited embedded Power MOSFET, so it is able to deliver up to 2 A DC current to the load depending on the application condition.
The input voltage can range from 2.9 V to 18 V, while the output voltage can be set starting from 0.6 V to VIN. Having a minimum input voltage of 2.9 V, the device is suitable for a 3.3 V bus.
Requiring a minimum set of external components, the device includes an internal 250 kHz switching frequency oscillator that can be externally adjusted up to 1 MHz.
Applications
Consumer: STB, DVD, DVD recorder, car
The VFQFPN8 package with an exposed pad allows reducing the RthJA down to approximately 60 °C/W.
audio, LCD TV and monitors
Figure 1. Application circuit
May 2014
This is information on a product in full production.
DocID13006 Rev 6
1/37
www.st.com
Co...