www.DataSheet4U.com
LT4356-1/LT4356-2 Surge Stopper DESCRIPTION
The LT®4356 surge stopper protects loads from high volt...
www.DataSheet4U.com
LT4356-1/LT4356-2 Surge Stopper DESCRIPTION
The LT®4356 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value thereby allowing the loads to continue functioning. The LT4356 also monitors the voltage drop between the VCC and SNS pins to protect against overcurrent faults. An internal amplifier limits the current sense voltage to 50mV. In either fault condition, a timer is started inversely proportional to MOSFET stress. If the timer expires, the FLT pin pulls low to warn of an impending power down. If the condition persists, the MOSFET is turned off. After a cool down period, the GATE pin pulls up turning on the MOSFET again. The spare amplifier may be used as a voltage detection comparator or as a linear
regulator controller driving an external
PNP pass
transistor. Back-to-back FETs can be used in lieu of a
Schottky diode for reverse input protection, reducing voltage drop and power loss. A shutdown pin reduces the quiescent current to less than 7μA during shutdown for the LT4356-1 and 60μA for the LT4356-2 while keeping the reference and auxiliary amplifier functioning.
FEATURES
n n n n n n n n n n n n n
Stops High Voltage Surges Adjustable Output Clamp Voltage Overcurrent Protection Wide Operation Range: 4V to 80V Reverse Input Protection to –60V Low 7μA Shutdown Current...