(LPC3130 / LPC3131) Lowest Cost ARM9
D
D
D R A FT
D R A FT
D R A FT
R
R A FT
A FT
www.DataSheet4U.com
LPC3130/3131
Rev. 1.01 — 21 May 2009
D
Low-c...
Description
D
D
D R A FT
D R A FT
D R A FT
R
R A FT
A FT
www.DataSheet4U.com
LPC3130/3131
Rev. 1.01 — 21 May 2009
D
Low-cost, low-power ARM926EJ-S MCUs with high-speed USB 2.0 OTG, SD/MMC, and NAND flash controller
D R R A A FT FT D R A FT D
D R A FT
D R A FT D FT D D R A R A FT
D
Preliminary data sheet
FT D R
R A
R A FT D R A FT D R A F A FT D R D R
1. General description
The NXP LPC3130/3131 combine an 180 MHz ARM926EJ-S CPU core, high-speed USB 2.0 On-The-Go (OTG), up to 192 KB SRAM, NAND flash controller, flexible external bus interface, four channel 10-bit ADC, and a myriad of serial and parallel interfaces in a single chip targeted at consumer, industrial, medical, and communication markets. To optimize system power consumption, the LPC3130/3131 have multiple power domains and a very flexible Clock Generation Unit (CGU) that provides dynamic clock gating and scaling.
A FT D R A
2. Features
2.1 Key features
CPU platform 180 MHz, 32-bit ARM926EJ-S 16 kB D-cache and 16 kB I-cache Memory Management Unit (MMU) Internal memory 96 kB (LPC3130) or 192 kB (LPC3131) embedded SRAM External memory interface NAND flash controller with 8-bit ECC 8/16-bit Multi-Port Memory Controller (MPMC): SDRAM and SRAM Communication and connectivity High-speed USB 2.0 (OTG, Host, Device) with on-chip PHY Two I2S-bus interfaces Integrated master/slave SPI Two master/slave I2C-bus interfaces Fast UART Memory Card Interface (MCI): MMC/SD/SDIO/CE-ATA Four-cha...
Similar Datasheet