IP113F

www.DataSheet4U.com IP113F Preliminary Data Sheet Managed 10/100Base-TX / FX Media Converter Features A 10/100BASE-TX/ 100BASE-FX converter with a SMI port for management Built in a 10/100BASE-TX transceiver Built in a PHY for 100BASE-FX Built in a 2-port switch – Pass all packets without address and CRC check (optional) – Supports modified cut-through frame forwarding for low latency – Supports pure converter mode data forwarding for extreme low latency – Supports flow control for full and half duplex operation – Bandwidth control – Forward 1600 bytes packet for management – Optional forward fragments Built in 128Kb RAM for data buffer Supports 3.3v I/O tolerance SMI (MDC, MDIO) and MII registers for management – Configure local and remote IP113F through local SMI – Monitor local and remote IP113F through local SMI – Configure/ monitor TP port support (auto-negotiation or force 10M/100M, full/half) – Configure/ monitor flow control, bandwidth – Supports loop back test (In-band or out-band, auto or program) – The maintenance frame is compatible to TS-1000 standard (the Telecommunication Technology Committee, TTC) Supports Statistic Counters Supports auto MDI-MDIX function Supports link fault pass through function Supports far end fault function LED display for link/activity, full/half, 10/100 Built in a watchdog timer to monitor internal switch error Supports EEPROM Configuration 0.25u CMOS technology Single 2.5V power supply 48-pin LQFP package General Description IP113F ...