Power Switch. ADP190 Datasheet

ADP190 Switch. Datasheet pdf. Equivalent

Part ADP190
Description High-Side Power Switch
Feature Data Sheet FEATURES Low RDSON of 105 mΩ at 1.8 V Internal output discharge resistor (ADP191) Turn-on.
Manufacture Analog Devices
Datasheet
Download ADP190 Datasheet




ADP190
Data Sheet
FEATURES
Low RDSON of 105 mΩ at 1.8 V
Internal output discharge resistor (ADP191)
Turn-on slew rate limiting (ADP191)
Low input voltage range: 1.1 V to 3.6 V
500 mA continuous operating current
Built-in level shift for control logic that can be operated
by 1.2 V logic
Low 2 μA (maximum) ground current
Ultralow shutdown current: <1 μA
Ultrasmall 0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP190/ADP191 are high-side load switches designed for
operation from 1.1 V to 3.6 V. These load switchs provide power
domain isolation for extended power battery life. The devices
contain a low on-resistance P-channel MOSFET that supports
more than 500 mA of continuous current and minimizes power
loss. The low 2 μA (maximum) of ground current and ultralow
shutdown current make the ADP190/ADP191 ideal for battery-
operated portable equipment. The built-in level shifter for enable
logic makes the ADP190/ADP191 compatible with modern
processors and GPIO controllers.
Logic Controlled,
High-Side Power Switches
ADP190/ADP191
TYPICAL APPLICATIONS CIRCUIT
VIN
+
GND
ADP190
ON
EN OFF
LEVEL SHIFT
AND SLEW
RATE CONTROL
VOUT
LOAD
Figure 1.
VIN
+
GND
ON
EN OFF
ADP191
LEVEL SHIFT
AND SLEW
RATE CONTROL
AND LOAD
DISCHARGE
Figure 2.
VOUT
LOAD
The ADP191 controls the turn-on slew rate of the switch to
reduce the input inrush current. The ADP191 also incorporates
an internal output discharge resistor to discharge the output
capacitance when the ADP191 output is disabled.
Beyond operating performance, the ADP190/ADP191 occupy
minimal printed circuit board (PCB) space with an area less than
0.64 mm2 and a height of 0.60 mm. It is available in an ultrasmall
0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP.
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2009–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



ADP190
ADP190/ADP191
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Typical Applications Circuit............................................................ 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Timing Diagram ........................................................................... 4
Absolute Maximum Ratings............................................................ 5
Thermal Data ................................................................................ 5
Thermal Resistance ...................................................................... 5
ESD Caution.................................................................................. 5
REVISION HISTORY
2/13—Rev. D to Rev. E
Changes to Logic High Voltage Parameter, Table 1 ..................... 3
Updated Outline Dimensions ....................................................... 15
11/10—Rev. C to Rev. D
Changed 4 mΩ to 4 MΩ in Theory of Operation Section .......... 9
3/10—Rev. B to Rev. C
Change to Low Input Voltage Range Value................ Throughout
Data Sheet
Pin Configuration and Function Descriptions..............................6
Typical Performance Characteristics ..............................................7
Theory of Operation .........................................................................9
Applications Information .............................................................. 10
Ground Current.......................................................................... 10
Enable Feature ............................................................................ 10
Timing.......................................................................................... 10
Thermal Considerations............................................................ 12
PCB Layout Considerations...................................................... 14
Outline Dimensions ....................................................................... 15
Ordering Guide .......................................................................... 15
1/10—Rev. A to Rev. B
Added ADP191.............................................................. Throughout
Changes to Table 1.............................................................................3
Changes to Table 3.............................................................................5
Changes to Ordering Guide .......................................................... 15
9/09—Rev. 0 to Rev. A
Changes to Ordering Guide .......................................................... 13
1/09—Revision 0: Initial Version
Rev. E | Page 2 of 16







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)