PI2EQX3431

www.DataSheet4U.com PI2EQX3431 3.2Gbps, 1-port, SATA2/SAS Re-Driver Features Two 3.2Gbps differential signal pairs Adjustable Receiver Equalization 100-Ohm Differential CML I/O’s Independent Output Level Control Input signal level detect and squelch for each channel OOB Support Low Power (100mW per Channel) Stand-by Mode – Power Down State VCC Operating Range: 1.8V ±0.1V Packaging: — 20-TQFN (3.5x 4.5mm) Description Pericom Semiconductor’s PI2EQX3431 is a low power, signal Re-Driver. The device provides programmable equalization, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference. PI2EQX3431 supports two 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or to extend the signals across other distant data pathways on the user’s platform. The integrated equalization circuitry provides flexibility with signal integrity of the signal before the re-driver. A low-level input signal detection and output squelch function is provided for each channel. Each channel operates fully independantly. When the channels are enabled (CE=1) and operating, that channels input signal level (on xIN+/-) determines whether the output is active. If the input signal level of the channel falls below the active threshold level (Vth-) then the outputs are driven to the common mode voltage. In addition to signal conditioning, when CE = 0, the device enters a low power standby mode. Block ...