MNU18-187DFI

www.DataSheet4U.com Scotchlok™ Terminals MNU18-187DFI, MNU14-187DFI Female Disconnect, Nylon Fully Insulated, Butted Seam D L W´ W´ Data Sheet Product Number MNU18-187DFI MNU14-187DFI Wire Range (AWG) 22-18 16-14 Mates with Male Tab Width (W´ ) x Thickness 0.187 x 0.020 0.187 x 0.020 Barrel Length 0.25 0.25 Barrel I.D. 0.085 0.085 Maximum Insulation Diameter 0.145 0.145 L 0.81 0.81 W 0.30 0.30 D 0.23 0.23 Installation Information ƽ WARNING UNDERWRITERS LABORATORIES STANDARD NO. UL 486A 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0.65 3M FILE NO. LR22190 Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: Barrel Seam: Insulator Max. Volt Rating: Maximum Operating Temp: Maximum Current: Insulator Material: Terminal Material: Plating: See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) 221˚F (105˚C) Same as Wire Nylon Brass Tin Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical) Suitable for factory installation on steel or brass tabs. UL and CSA. Suitable for field application on brass tabs, strain relief is required. UL only. Engineering Specification www.DataSheet4U.com Crim...