MAX5072

19-3503; Rev 2; 2/06 KIT www.DataSheet4U.com ATION EVALU E L B A IL AVA 2.2MHz, Dual-Output Buck or Boost Converter with POR and Power-Fail Output General Description Features ♦ 4.5V to 5.5V or 5.5V to 23V Input Supply Voltage Range ♦ 0.8V (Buck) to 28V (Boost) Output Voltage ♦ Two Independent Output DC-DC Converters with Internal Power MOSFETs ♦ Each Output can be Configured in Buck or Boost Mode ♦ IOUT1 and IOUT2 of 2A and 1A (Respectively) in Buck Mode ♦ 180° Out-of-Phase Operation ♦ Clock Output for Four-Phase Operation ♦ Switching Frequency Programmable from 200kHz to 2.2MHz ♦ Digital Soft-Start and Independent Converter Shutdown ♦ SYNC Input, Power-On Reset, Manual Reset, And Power-Fail Output ♦ Short-Circuit Protection (Buck)/Maximum DutyCycle Limit (Boost) ♦ Thermal Shutdown ♦ Thermally Enhanced 32-Pin Thin QFN Package Dissipates up to 2.7W at +70°C MAX5072 The MAX5072 is a dual-output DC-DC converter with integrated high-side n-channel power MOSFETs. Each output can be configured either as a buck converter or a boost converter. The MAX5072 is designed to manage the power requirements of xDSL modems. The wide 5.5V to 23V input voltage range allows for the use of inexpensive AC adapters to power the device in xDSL modem applications. Each output is programmable down to 0.8V in the buck mode and up to 28V in the boost mode with an output voltage accuracy of ±1%. In the buck mode, converter 1 and converter 2 can deliver 2A and 1A, respectively. The output switching f...