Isolated Transmitter. DIN3 Datasheet

DIN3 Transmitter. Datasheet pdf. Equivalent

Part DIN3
Description Low Cost 4-20mA Passive Isolated Transmitter
Feature SHENZHEN SUNYUAN TECHNOLOGY CO., LTD. www.DataSheet4U.com Signal Isolated Amplifier DIN3 Series Lo.
Manufacture Shenzhen Sunyuan
Datasheet
Download DIN3 Datasheet



DIN3
www.DataSheet4U.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
Signal Isolated Amplifier
DIN3 Series Low Cost 4-20mA Passive Isolated Transmitter
( DIN Rail-Mounted Small Size: 82x45x12.5mm)
General characteristic:
>> Efficiency Grade:0.1/0.2
>> Easy to use,extra power supply no needed.
>> High precision, error and nonlinearity < 0.2%
>> 0-10mA/0-20mA/4-20mA international standard current
signal input and output
>> Between input and output uses the passive electromagnetism
isolation technology,isolation voltage can reach 3000VAC.
>> Temperature Range:-25~70 deg.C
>> Standard DIN Rail Mounting,super slim (12.5mm),low cost.
Applications
>> DC current/voltage signal isolated/transfer/amplifier
>> Equipment and sensor signal acquisition
>> 4-20mA signal isolation and transfer
>> Ground-loop elimination
>> Electric power,medical instrument isolated safe bar.
>> No distortion in long distance signal
Specification:
SUNYUAN
DIN3 series 4-20mA passive isolated transmitter,it is that makes current signal input (4-20mA/0-20mA/0-10mA) isolate,
transform to proportionate current signal output (4-20mA/0-20mA/0-10mA). Product interior includs input signal
interference suppression filter circuit, signal modulation circuit, signal isolating circuit and output demodulation filter circuit.
The input and the output side width crawls the electricity to be away from and the internal quarantine measures enables
this serial products to be possible to realize between the signal input and the signal output isolation voltage 3KVAC.
Part number and description:
Part No.: DIN3 ISO 4-20mA
This part can be used in three convertor as follows:
1. Input:4-20mA Output:4-20mA
2. Input:0-20mA Output:0-20mA
3. Input:0-10mA Output:0-10mA
Example:
If input is 4-20mA,output is 4-20mA,the part No. is DIN3 ISO 4-20mA
If input is 0-20mA,output is 0-20mA,the part No. also is DIN3 ISO 4-20mA
General parameter:
>> Efficiency Grade-----------0.1/0.2
>> Isolation------Signal Input/Output
>> Temperature Range-----25~70 deg.C
>> Isolation voltage-----Input/Output 2500VDC 1Min. Leak current 1mA
>> Endure voltage-----3KVAC,1.2/50us (Peak Value)
>> Operation Humidity----10~90%
>> Storage Temperature-----45~+80 deg.C
>> Storage Humidity----------10~95%
Http://www.szsunyuan.com E-mail:sales02@szsunyuan.com



DIN3
www.DataSheet4U.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
Signal Isolated Amplifier
Iutput parameter
Input item
Input impedance
Input over load
0-10mA
0-20mA
4-20mA
=200 ohm +RL
RL:Output port load resistance
24mA
Output parameter:
Output item
Output impedance
Output over load
0-10mA
0-20mA
4-20mA
<=Rin-200 ohm
Rin:input signal load
30mS
Note:Because DIN3 ISO4-20mA is passive isolation module,Itself will lose certain power in operationg, therefore in field
application time, guarantee that the product normal work, input current signal load capacity needs to satisfy the following
condition
RinRL+200
Rin:Input signal load capacity
RL: Output port load resistance(Sum of the receiving end sampling resistance and circuit resistance)
In the industry scene,generally the sampling resistance's value is 250 ohm,circuit resistance is smaller than 50 ohm,
Therefore only the input current signal load capacity is above 500, you can use our DIN3 ISO the 4-20mA.But if input
current signal load capacity is too low,you had better use our active(with power supply) signal isolated products.(DIN3
ISOEM series)
Footprint Description:
PIN Function
1 Signal IN-
2 Signal IN+
3 NC
4 NC
5 NC
6 NC
7 Signal Out -
8 Signal Output +
Unit:mm
connecting diagram
Http://www.szsunyuan.com E-mail:sales02@szsunyuan.com







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)