Quad Copper-cable Signal Conditioner
19-2928; Rev 1; 2/07
www.DataSheet4U.com KIT ATION EVALU E L B AVAILA
Quad Copper-Cable Signal Conditioner
General Des...
Description
19-2928; Rev 1; 2/07
www.DataSheet4U.com KIT ATION EVALU E L B AVAILA
Quad Copper-Cable Signal Conditioner
General Description Features
♦ Link Features Span 20m with 24AWG, 15m with 28AWG Span 0.5m of FR4 on Each Host 1.6W Total Power with 3.3V Supply Loopback Function ♦ Cable Driver Features Selectable Output Preemphasis FR4 Input Equalization Signal Detect for Each Channel Output Disable ♦ Cable Receiver Features Selectable FR4 Output Preemphasis Cable Input Equalization Signal Detect for Each Channel Output Disable
MAX3983
The MAX3983 is a quad copper-cable signal conditioner that operates from 2.5Gbps to 3.2Gbps. It provides compensation for 4x copper InfiniBand and 10Gbase-CX4 Ethernet links, allowing spans of 20m with 24AWG and 15m with 28AWG. The cable driver section provides four selectable preemphasis levels. The input to the cable driver compensates for up to 0.5m of FR4 circuit board material. The cable receiver section provides additional fixed input equalization while offering selectable preemphasis to drive FR4 circuit boards up to 0.5m. The MAX3983 also features signal detection on all eight inputs and internal loopback that allows for diagnostic testing. It is packaged in a 10mm x 10mm, 68-pin QFN and operates from 0°C to +85°C.
Applications
4x InfiniBand (4 x 2.5Gbps) 10Gbase-CX4 Ethernet (4 x 3.125Gbps) 10G Fibre Channel XAUI (4 x 3.1875Gbps) 4x Copper-Cable or Backplane Transmission (1Gbps to 3.2Gbps)
Pin Configuration appears at end of data sheet.
Or...
Similar Datasheet