RS-232 Transceiver
www.DataSheet4U.com
STLV3243EB
± 15 kV ESD protected 2.3 to 5.5 V, 400 kbps, RS-232 transceiver with auto-power-down
Fe...
Description
www.DataSheet4U.com
STLV3243EB
± 15 kV ESD protected 2.3 to 5.5 V, 400 kbps, RS-232 transceiver with auto-power-down
Features
■
ESD protection for RS-232 I/O pins: – ± 8 kV IEC 1000-4-2 contact discharge – ± 15 kV human body model 1 mA supply current achieved when in autopower-down 250 kbps minimum guaranteed data rate Guaranteed 6 V/ms slew rate range Guaranteed mouse drive ability 0.1 µF external capacitors Meet EIA/TIA-562 specifications Available in Flip-Chip28 package
Flip-Chip28
■ ■ ■ ■ ■ ■ ■
auto-power-down enabled, the device is automatically activated when a valid signal is applied to any receiver input. Typical applications are notebooks, PDAs, smartphones, hand-held equipment, palmtop computers, peripherals, battery-powered equipment, and printers.
Description
The STLV3243EB device consists of 3 drivers, 5 receivers and a dual charge-pump circuit. All transmitter outputs and receiver inputs are protected up to ±8 kV USING IEC 1000-4-2 contact discharge and ±15 kV using the human body model. The receiver R2 is always active to implement a wake-up feature for serial port. The device is guaranteed to run at data rates of 250 kbps while maintaining RS-562 output levels.
s b O
The auto-power-down feature operates when FORCEON is low and FORCEOFF is high. During this operation mode, if the device does not sense a valid RS-562 signal, the driver outputs are disabled. If FORCEOFF is set low, both drivers and receivers (expert R2B) are shut off, and supply current is...
Similar Datasheet