AK8817

ASAHI KASEI www.DataSheet4U.com [AK8817/18] AK8817/18 NTSC/PAL Digital Video Encoder General Description The AK8817 is a Digital Video Encoder for Portable and Mobile application. ITU-R BT.601 level compatible Y, Cb,and Cr signals which correspond to 27MHz or square pixel are encoded into either NTSC or PAL compatible composite video signal. Interface is made in HSYNC-, VSYNC- synchronized slave-mode operation or ITU-R.Bt656. AK8817 has 75ohm driver with LPF. It is possible to encode the VBID(CGMS-A) and WSS signal on the output video signal. Host Control interface is I2C Bus I/F. Features NTSC-M, PAL-B, D, G, H, I Composite Video encoding Y:Cb:Cr 4:2:2 H/V Slave Operation / ITU-R.BT656 Interface Y filtering: 2 x over-sampling C filtering: 4 x over-sampling 9bit DAC Setup Macrovision Rev.7.1.1L VBID ( CGMS-A ) Compatible WSS Compatible Operation Clock rate : 27MHz or Square-pixel Clock rate(NTSC:24.5454MHz/PAL29.50MHz) Video Amp with LPF On-chip Color Bar Output Black Burst Output Power Supply (AVDD, DVDD) 2.7V - 3.3V I/F Power Supply (PVDD) 1.6V - 3.3V Power Down mode Monolithic CMOS 41pin FBGA(4mm x 4mm) (Pb Free) (Notice *) This device is protected by U.S. patent numbers 4,631,603, 4,577,216, and 4,819,098, and other intellectual rights. The use of Macrovision’s copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per -view use only, unless otherwise authorized i...