Document
DATA SHEET
www.DataSheet4U.com
GaAs INTEGRATED CIRCUIT
μPG2405T6Q
1 W SP3T SWITCH
DESCRIPTION
The μPG2405T6Q is an SP3T GaAs FET switch which was developed for Bluetooth , wireless LAN and NFC.
TM
This device can operate frequency from 500 MHz to 2.5 GHz, having the low insertion loss and high linearity. This device is housed in a 10-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this package is able to high-density surface mounting.
FEATURES
• Low insertion loss : Lins = 0.45 dB TYP. @ f = 1.0 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins = 0.55 dB TYP. @ f = 2.0 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins = 0.60 dB TYP. @ f = 2.5 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V • High isolation : ISL = 28 dB TYP. @ f = 1.0 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V : ISL = 22 dB TYP. @ f = 2.0 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V : ISL = 20 dB TYP. @ f = 2.5 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V • Handling power : Pin (0.1 dB) = +31.0 dBm TYP. @ f = 2.5 GHz, Vcont (H) = 2.8 V, Vcont (L) = 0 V • High-density surface mounting : 10-pin plastic TSSON package (2.0 × 1.35 × 0.37 mm)
APPLICATIONS
• Bluetooth and IEEE802.11b/g etc. • NFC (FeliCaTM etc.)
ORDERING INFORMATION
Part Number Order Number Package Marking G5M Supplying Form • Embossed tape 8 mm wide • Pin 5, 6 face the perforation side of the tape • Qty 3 kpcs/reel
μPG2405T6Q-E2
μPG2405T6Q-E2-A 10-pin plastic TSSON
(Pb-Free)
Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: μPG2405T6Q
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. PG10753EJ01V0DS (1st edition) Date Published April 2009 NS Printed in Japan
2009
www.DataSheet4U.com
μPG2405T6Q
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. Pin Name RF1 GND RF2 Vcont2 RF3 Vcont3 GND ANT GND Vcont1
(Top View)
1 2 3 4 5 10 9 8 7 6 1 2 3 4 5
(Top View)
10 9 8 7 6 10 9 8 7 6
(Bottom View)
1
1 2 3
2 3
4 5 6
TRUTH TABLE
Vcont1 High Low Low Vcont2 Low High Low Vcont3 Low Low High ANT−RF1 ON OFF OFF ANT−RF2 OFF ON OFF ANT−RF3 OFF OFF ON
ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified)
Parameter Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature Symbol Vcont Pin TA Tstg Ratings +6.0
Note
Note ⎪Vcont (H) − Vcont (L)⎪ ≤ 6.0 V
G5M
4 5
7 8 9 10
Remark Exposed pad : GND
Unit V dBm °C °C
+34 −45 to +85 −55 to +150
2
Data Sheet PG10753EJ01V0DS
www.DataSheet4U.com
μPG2405T6Q
RECOMMENDED OPERATING RANGE (TA = +25°C)
Parameter Switch Control Voltage (H) Switch Control Voltage (L) Control Voltage Difference (H) Symbol Vcont (H) Vcont (L)
cont (H) Note1
MIN. 2.7 −0.2 −0.1 −0.1
TYP. 2.8 0 0
MAX. 3.0 0.2 0.1
Unit V V V
ΔV ΔV
Control Voltage Difference (L)
cont (L) Note2
0
0.1
V
Notes 1. ΔVcont (H) is a difference between the maximum and the minimum control voltages among Vcont1 (H), Vcont2 (H) and Vcont3 (H). 2. ΔVcont (L) is a difference between the maximum and the minimum control voltages among Vcont1 (L), Vcont2 (L) and Vcont3 (L).
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont (H) = 2.8 V, Vcont otherwise specified)
Parameter Insertion Loss
(L)
= 0 V, ZO = 50 Ω, DC blocking capacitors = 56 pF, unless
Symbol Lins
Pass ANT to RF1, 2, 3
Test Conditions f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz
MIN. − − − 24 18 16 15 15 +29.0
TYP. 0.45 0.55 0.60 28 22 20 20 20 +31.0
MAX. 0.65 0.80 0.85 − − − − − −
Unit dB dB dB dB dB dB dB dB dBm
Isolation
ISL
ANT to RF1, 2, 3 (OFF)
f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz
Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power
Note
RLin RLout Pin (0.1 dB)
ANT to RF1, 2, 3 ANT to RF1, 2, 3 ANT to RF1, 2, 3
f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 2.5 GHz
2nd Harmonics
2f0
ANT to RF1, 2, 3
f = 2.5 GHz, Pin = 23 dBm
65
75
− −
dBc
3rd Harmonics
3f0
ANT to RF1, 2, 3
f = 2.5 GHz, Pin = 23 dBm
65 − −
75
dBc
Switch Control Current Switch Control Speed
Icont tSW
RF None
0.2 700
50 −
μA
ns
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range.
Data Sheet PG10753EJ01V0DS
3
www.DataSheet4U.com
μPG2405T6Q
EVALUATION CIRCUIT
(Top View)
RF1 C1 2 9 1 10 C2 Vcont1
RF2 C1 Vcont2 C2 RF3 C1
3
8 C1
ANT
4
7
5
6 C2
Vcont3
The app.