AT90SCR100

www.DataSheet4U.com General Features High Performance, Low Power AVR® 8-Bit Microcontroller Advanced RISC Architecture – 131 Powerful Instructions - Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Up to 16MIPS Throughput at 16Mhz – On-chip 2-cycle Multiplier Non-volatile Program and Data Memories – 64K Bytes of In-System Self-Programmable Flash Endurance: 10,000 Write/Erase Cycles – 4K Bytes EEPROM Contains 128 Bytes of One Time Programmable Memory Endurance: 100,000 Write/Erase Cycles – 4K Bytes Internal SRAM – Optional Boot Code Section In-System Programming by On-chip Bootloader program JTAG (IEEE std. 1149.1 compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Locks Bits through JTAG Interface – Locking JTAG for Software Security (using OTP programmation) ISO7816 UART Interface Fully compliant with EMV, GIE-CB and WHQL Standards – Programmable ISO clock from 1 Mhz to 4.8, 6, 8 or 12Mhz – Card insertion/removal detection with automatic deactivation sequence – Programmable Baud Rate Generator from 372 to 3 clock cycles – Synchronous/Asynchronous Protocols T=0 and T=1 with Direct of Inverse Convention – Automatic character repetition on parity errors – 32 Bit Waiting Time Counter – 16 Bit Guard Time Counter/Block Guard Time Counter – Internal Step Up/Down Converter with Programmable Voltage Output if DC/DC embedded: Class A: 5...