Document
LTC4252-1/LTC4252-2 LTC4252A-1/LTC4252A-2
Negative Voltage Hot Swap Controllers
Features
n Allows Safe Board Insertion and Removal from a Live – 48V Backplane
n Floating Topology Permits Very High Voltage Operation n Current Limit With Circuit Breaker Timer n Fast Response Time Limits Peak Fault Current n Programmable Soft-Start Current Limit n Programmable Timer with Drain Voltage
Accelerated Response n ±1% Undervoltage/Overvoltage Threshold Accuracy
(LTC4252A) ■ Adjustable Undervoltage/Overvoltage Protection ■ LTC4252-1/LTC4252A-1: Latch Off After Fault ■ LTC4252-2/LTC4252A-2: Automatic Retry After Fault ■ Available in 8-Pin and 10-Pin MSOP Packages
Applications
n Hot Board Insertion n Electronic Circuit Breaker n – 48V Distributed Power Systems n Negative Power Supply Control n Central Office Switching n High Availability Servers n ATCA
Description
The LTC®4252 negative voltage Hot SwapTM controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting and a fast feedforward path that limits peak current under worst-case catastrophic fault conditions.
Adjustable undervoltage and overvoltage detectors disconnect the load whenever the input supply exceeds the desired operating range. The LTC4252’s supply input is shunt regulated, allowing safe operation with very high supply voltages. A multifunction timer delays initial startup and controls the circuit breaker’s response time. The circuit breaker’s response time is accelerated by sensing excessive MOSFET drain voltage, keeping the MOSFET within its safe operating area (SOA). An adjustable softstart circuit controls MOSFET inrush current at start-up.
The LTC4252-1/LTC4252A-1 latch off after a circuit breaker fault times out. The LTC4252-2/LTC4252A-2 provide automatic retry after a fault. The LTC4252A-1/LTC4252A-2 feature tight ±1% undervoltage/overvoltage threshold accuracy. The LTC4252 is available in either an 8-pin or 10-pin MSOP, while the LTC4252A is available in the 10-pin MSOP.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Hot Swap is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners.
Typical Application
–48RTN
–48RTN (SHORT PIN)
R1 402k
1%
R2 32.4k
1%
–48V/2.5A Hot Swap Controller
RIN 3× 1.8k IN SERIES 1/4W EACH
+ CL
100µF
C1 10nF
DDIDNZ†13B** CT 0.33µF
VIN LTC4252-1
OV
PWRGD
UV
DRAIN
TIMER
GATE
SS VEE SENSE CSS 68nF
CIN R3 1µF 5.1k
* RD 1M
LOAD
EN VOUT
Q1 IRF530S
RC 10Ω
CC 18nF
RS 0.02Ω
– 48V * M0C207 **DIODES, INC
†RECOMMENDED FOR HARSH ENVIRONMENTS
425212 TA01
GATE 5V/DIV
SENSE 2.5A/DIV
VOUT 20V/DIV
PWRGD 10V/DIV
For more information www.linear.com/LTC4252-1
Start-Up Behavior
1ms/DIV
425212 TA01a
425212fe
1
LTC4252-1/LTC4252-2 LTC4252A-1/LTC4252A-2
Absolute Maximum Ratings
All Voltages Referred to VEE (Note 1)
Current into V.