Document
isc Silicon NPN Power Transistor
2SD1476
DESCRIPTION ·Low Collector Saturation Voltage
: VCE(sat)= 1.0V(Max)@ IC= 2A ·Collector-Emitter Breakdown Voltage-
: V(BR)CEO= 60V (Min) ·Good Linearity of hFE ·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
APPLICATIONS ·Designed for power switching applications.
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VALUE
UNIT
VCBO
Collector-Base Voltage
80
V
VCEO
Collector-Emitter Voltage
60
V
VEBO
Emitter-Base Voltage
6
V
IC
Collector Current-Continuous
4
A
IB
Base Current-Peak
Collector Power Dissipation @ TC=25℃
PC Collector Power Dissipation @ Ta=25℃
TJ
Junction Temperature
1
A
30 W
1.4
150
℃
Tstg
Storage Temperature Range
-55~150
℃
isc website:www.iscsemi.com
1 isc & iscsemi is registered trademark
isc Silicon NPN Power Transistor
ELECTRICAL CHARACTERISTICS
TC=25℃ unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
V(BR)CEO Collector-Emitter Breakdown Voltage IC= 10mA; IB= 0
VCE(sat) Collector-Emitter Saturation Voltage IC= 2A; IB= 0.2A
VBE(on) Base-Emitter On Voltage
IC= 1A; VCE= 4V
ICBO
Collector Cutoff Current
VCB= 80V; IE= 0
IEBO
Emitter Cutoff Current
VEB= 6V; IC= 0
hFE-1
DC Current Gain
IC= 1A; VCE= 4V
hFE-2
DC Current Gain
IC= 3A; VCE= 4V
fT
Current-Gain—Bandwidth Product
IC= 0.2A; VCE= 12V
Switching times
ton
Turn-on Time
tstg
Storage Time
IC= 4A; IB1= IB2= 0.4A
tf
Fall Time
2SD1476
MIN TYP. MAX UNIT
60
V
1.0
V
1.2
V
100 μA
100 μA
40
320
20
50
MHz
0.35
μs
1.0
μs
0.3
μs
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
2 isc & iscsemi is registered trademark
.