LFCL250A6

Cable Limiters 600 Volts AC SPECIFICATIONS Voltage Rating: 600 volts AC Interrupting Rating: 200,000 Amperes Cable Size Range: 4/0 – 750MCM Copper or Aluminum Minimum Operating Temperature: 80°C ORDERING INFORMATION LFCL - 500 - C - 1 Terminal Material (Aluminum or Copper) Type of Termination LFCL4/0A3 LFCL250A3 LFCL350A3 LFCL500A3 LFCL750A3 LFCL4/0A6 LFCL250A6 LFCL350A6 LFCL500A6 LFCL750A6 85 Cable limiters are fusible devices that provide very fast short-circuit protection, primarily to faulted cables, but also to other conductors such as busway. Cable limiters do not have an ampere rating, and cannot be used to provide overload protection. Cable limiters are selected by cable size; for example, a 500 kcmil cable requires a 500 kcmil cable limiter. Their main use is to isolate faulted cables in circuits containing three or more parallel conductors per phase. They may be installed on the line side of the main service to provide short-circuit protection to the service conductors. This is especially important when service conductors are tapped from large low-voltage networks or from large low impedance transformers. Cable limiters have terminals which permit them to be installed in a variety of equipment. The most common configuration is the offset blade on one end and the crimp terminal on the other end. This permits the limiter to replace a cable terminal (lug). CATALOG NUMBER Cable Type Type Termination Cable Size COPPER ALUMINUM 4/0 LFCL4/0C1 LFCL4/0A1 250MCM LFCL250C1...