TS79M06

TS79M00 series 3-Terminal Medium Current Negative Voltage Regulator Pin assignment: 1. Ground 2. Input 3. Output (Heatsink surface connected to Pin 2) Voltage Range - 5V to - 24V Output Current up to 0.5A General Description The TS79M00 Series negative voltage regulators are identical to the popular TS7900 Series devices, except that they are specified for only half the output current. Like the TS7900 devices, the TS79M00 Series 3-Terminal regulators are intended for local, on-card voltage regulation. Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass transistor combine to make these devices remarkably rugged under most operating conditions. Maximum output current with adequate heatsink is 500mA This series is offered in 3-pin TO-220, TO-252 package. Features — — — — — Output current up to 0.5A No external components required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area compensation Output voltage offered in 4% tolerance Standard Application — Ordering Information Part No. TS79MxxCZ TS79MxxCP Operating Temp. -20 ~ +125 C o Package TO-220 TO-252 Note: Where xx denotes voltage option. A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if...