TS79M00A Series
3-Terminal 500mA Negative Voltage Regulator
TO-220 TO-252 (DPAK)
Pin Definition: 1. Input 2. Ground (tab...
TS79M00A Series
3-Terminal 500mA Negative Voltage
Regulator
TO-220 TO-252 (DPAK)
Pin Definition: 1. Input 2. Ground (tab) 3. Output
General Description
The TS79M00A series of fixed output negative voltage
regulators are intended as complements to the popular TS78M00A series device. These negative
regulators are available in the same seven-voltage options as the TS7900A devices. In addition, one extra voltage option commonly employed in MECL systems is also available in the negative TS79M00A Series. Available in fixed output voltage options from -5.0 to -24 volts, these
regulators employ current limiting, thermal shutdown, and safe-area compensation--making them remarkably rugged under most operating conditions. With adequate heat sinking they can deliver output currents in excess of 0.5 ampere. This series is offered in 3-pin TO-220 & TO-252 package.
Features
● ● ● ● ● ● Output Voltage Range -5 to -24V Output current up to 0.5A No external components required Internal thermal overload protection Internal short-circuit current limiting Output
transistor safe-area compensation
Standard Application Circuit
● Output voltage offered in 2% tolerance Ordering Information
Part No.
TS79MxxACZ C0 TS79MxxACP RO
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required i...