EVALUATION KIT AVAILABLE
Ultra-Small, Low-Power Single
Comparators in 4-Bump UCSP and 5 SOT23
The MAX9060–MAX9064 are small single comparators,
ideal for a wide variety of portable electronics applications
such as cell phones, media players, and notebooks that
have extremely tight board space and power constraints.
These comparators are offered in both, a miniature
4-bump UCSP™ package with a 1mm x 1mm footprint (as
small as two 0402 resistors), and a 5-pin SOT23 package.
The MAX9060–MAX9064 feature an input voltage range
of -0.3V to +5.5V independent of supply voltage. These
devices maintain high impedance at the inputs even when
powered down (VCC or VREF = 0V). They also feature
internal filtering to provide high RF immunity.
The MAX9060 and MAX9061 have open-drain outputs and
draw quiescent supply current from a user-supplied refer-
ence voltage, VREF, between 0.9V and 5.5V. These devic-
es consume only 100nA (max) supply current and operate
over the extended -40°C to +85°C temperature range.
The MAX9062, MAX9063 and MAX9064 are single com-
parators with an internal 0.2V reference. These devices
feature either a push-pull or an open-drain output. They
consume only 700nA (max) supply current. The MAX9062,
MAX9063, and MAX9064 operate down to VCC = 1V over
the extended -40°C to +85°C temperature range.
●● Cell Phones
●● Portable Media Players
●● Electronic Toys
●● Notebook Computers
●● Portable Medical Devices
Selector Guide and Typical Operating Circuits appears at
end of data sheet.
TOP VIEW (BUMPS ON BOTTOM)
●● Tiny 1mm x 1mm x 0.6mm 4-Bump UCSP
●● Footprint = Two 0402 Resistors
●● Also Available in a 5-Pin SOT23 Package
●● Ultra-Low Operating Current (100nA max)
●● Input Voltage Range = -0.3V to +5.5V
●● External REF Range = 0.9V to 5.5V
●● Internal REF Voltage = 0.2V
●● 15μs Propagation Delay
●● -40°C to +85°C Extended Temperature Range
Note: All devices are specified over the extended -40°C
to+85°C operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified device.
T = Tape and reel.
G45 = Protective die coating.
UCSP is a trademark of Maxim Integrated Products, Inc.
REF = MAX9060/MAX9061
(VCC) = MAX9062–MAX9064
19-4105; Rev 6; 12/14