FAN6753

FAN6753 — Highly Integrated Green-Mode PWM Controller July 2009 FAN6753 Highly Integrated Green-Mode PWM Controller Features ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ High-Voltage Startup Low Operating Current: 2.7mA Adaptive Decreasing PWM Frequency to 22KHz Built-in Full-Range Frequency Hopping to Reduce EMI Emission Fixed PWM Frequency: 65KHz Peak-Current-Mode Control Cycle-by-Cycle Current Limiting Leading-Edge Blanking (LEB) Synchronized Slope Compensation Internal Auto-Recovery Open-Loop Protection GATE Output Maximum Voltage Clamp: 18V VDD Under-Voltage Lockout (UVLO) VDD Over-Voltage Protection (OVP), Auto Recovery / Latch for Option Internal Auto-Recovery Sense Short-Circuit Protection for Option Description The highly integrated FAN6753 PWM controller provides several features to enhance the performance of flyback converters. To minimize standby power consumption, a proprietary adaptive green-mode function provides frequency modulation at light-load conditions. To avoid acousticnoise problems, the minimum PWM frequency is set above 22KHz. This green-mode function enables the power supply to meet international power conservation requirements. With the internal high-voltage startup circuitry, the power loss due to bleeding resistors is also eliminated. To further reduce power consumption, FAN6753 is manufactured using the BiCMOS process, which allows an operating current of only 2.7mA. FAN6753 integrates a full-range frequency-hopping function internally that helps reduce EMI em...