EMC Choke Coil
EMC Choke Coil
Type: PFN0716
◆ Product Description
・￠16.5mm×8.0mm. Max ・In addition to the typica...
Description
EMC Choke Coil
Type: PFN0716
◆ Product Description
・￠16.5mm×8.0mm. Max ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements.
◆ Feature
・Iron dust core is used to realize better DC Saturation characteristics and higher noise absorption effect. ・Less leakage magnetic flux. ・Ideally used as normal mode chokes EMI suppression in power supplies or signal lines. ・Elimination for impulse noise. ・RoHS Compliance
◆ Dimensions (mm)
φ16.5 MAX. 8.0 MAX.
www.DataSheet4U.com
NO SOLDER DIP 10.0±2.0
SOLDER
1.5 MAX.
φ0.65 MAX.
◆ Specification
Part Name. PFNØ716NP-NM29A PFNØ716NP-NM39A Inductance (μH) [MIN.] At 1kHz 21 37 D.C.R.(mΩ) [MAX.] (at20℃) 43 58 Impedance [MIN.] Rated Current (A)※1 5.4 2.9
①
544Ω ａt 5MHz 1245Ω ａt 5MHz
②
1180Ω ａt 10MHz 2070Ω ａt 7MHz
③
1245Ω ａt 20MHz 950Ω ａt 15MHz
※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Please refer to the sales offices on our website for a representative near you
www.sumida.com
1/1
...
Similar Datasheet
